EN
CN
PID Test System (Single Power Solution)
Product description
Specifications
Download
Meet the PID test requirement specified in the IEC62804 standard.
l The frame the module is grounded, which not only simulates the actual situation, but also prevents the potential danger caused by the high voltage of the frame during the test.
l For each module, use the 4-wire test method, 2 high-voltage cables, and 2 ground cables. The high-voltage cables are connected to the inside of the module through the terminal box. The ground wire is connected to the frame or connected to other effective positions.
l Multiple currents are displayed simultaneously;
l Conversion of positive power supply and negative power supply, which is simulation of positive ground or negative ground.
l Can set the test time, with automatically stop;
l The screen displays the test conditions and records the test data.
l Communication with the IPC
project | Parameters |
Size | 510mm*410mm*180mm |
Weight | 12kg |
voltage range | -1500V～0V/ 0～+1500V |
Source effect | ≤0.2% |
Time drift | ≤0.3%/h |
Temperature drift | ≤0.5‰/℃ |
Ripple | ≤0.5% |
Alarm setting range | 1～1000 uA /-1000 uA～1 |
testing time | 0～168h |
Insulation resistance | ＞1000MΩ |
temperature range | RT+10～+110℃ |
Temperature control stability | ±0.5℃ |
Temperature uniformity | ≤±2.0℃ |
Heating rate | Meet the heating rate of 5°C/min. |
Humidity control range | 70～95%RH |
Humidity control stability | ≤±2.0%RH |
Humidity uniformity | ±3.0%RH |
